      


    

    
MPEG IMX Studio Editing Recorder. Highest level MPEG-2 4:2:2 Profile@Main Level recording at 50Mbps, I frame only . 8-bit, 4:2:2 digital component recording (SMPTE D-10 format). Compact 4 RU height. Can play back Betacam/SP, Betacam SX and MPEG IMX and Digital Betacam tapes. Supports input/output bit rates of 30, 40 and 50 Mbps with built-in SDTI-CP interface. Features pre-read, dynamic motion control, and records 8 Audio channels at 16- bits/channel, or 4 Audio Channels at 24-bits/channel.Audio sample frequency is 48 KHz. All audio channels can be independently edited in either mode. Can transfer D-10 stream at 2x real time over SDTI-CP (as a standard feature), and has Metadata capacity of 255 bytes/frame. Video interfaces include SDI, SDTI, Component and Composite analog, all standard. Audio interfaces include embedded audio in SDI bitstream, AES/EBU, and analog, all standard. Machine control via RS 422 and 232, standard. Can accept BKMW-E2000 "e-VTR" optional interface board, which allows transfer of video and audio over IP networks.
- MPEG-2 4::2:2 Digital Component Recording at 50 Mbps usingI-Frame only compression
- Frame accurate insert/assemble editing
- Uses existing acquisition for source playback - Digital Betacam,Betacam, Betacam SP, Betacam SX as well as MPEG IMX
- Compact 4 Rack Unit Chassis
- MPEG elementary stream over SDTI-CP for both input and output
- Accepts 30, 40, 50 Mbps for both input and output
- Digital 16-bit 8ch or 24-bit 4ch independently editable,uncompressed audio
- Long recording times of 184 minutes for large cassette and 60minutes for small cassettes
- Analog composite, analog component, SDI and SDTI I/O as standard
- Analog audio (4 ch), AES/EBU audio (16-bit , 8ch or 24-bit 4-ch)
| Feature | Benefit |
|---|
| High bit rate recording for excellent video quality | - Multi-format playback capabilities as standard
| Plays back Betacam/SP, Betacam SX, MPEG IMX without need foradjustments or adaptors | | Supports 30, 40, 50 Mbps MPEG inputs and outputs LegacyBetacam-based formats and MPEG IMX tapes can be output through SDTI-CP. | - Up to 8, 16-bit independently editable digital audiochannels
| Flexible for use in multi-channel (Dolby Digital) ormulti-language recording | - 525/625 Switchable operation
| Flexible for use in worldwide environments | - Migration to HDTV (optional)
| Optional output board supporting 1080i, 480P an 720Pupconversion even using legacy Betacam formats. |
|